T07/T08
inorm
±3mm/10m
Class Ⅱ
4*1.5V AA
| Quantity: | |
|---|---|
T07 (red light) /T08 (green light) laser level adopts imported high quality light source, the whole body is covered with soft glue, anti-seismic and anti-fall, one two-color mode process, double laser module, double switch design, small size, easy to carry
| Model | T07（red beam） | T08 （green beam） | ||
| Laser wavelength | 630-670nm | 505-550nm | ||
| Laser power(H/V) | 5mw | 10mw | ||
| Laser class | Output<1mW Class 2 | Output<1mW Class 2 | ||
| Laser beam | 1H1V(Vertial line over zenith) | 1H1V(Vertial line over zenith) | ||
| Accuracy(H/V) | ±3mm/10m | ±3mm/10m | ||
| Auto-compensation Range | 4°±1° | 4°±1° | ||
| Beam Emission Angle(H/V) | ＞130° | ＞130° | ||
| IP rating | IP54 | IP54 | ||
| Laser class | Class 2 | |||
| Working temperature | ﹣10~50℃ | ﹣10~50℃ | ||
| Working range | 15m | 30m | ||
| Working range with reciever | about 50m | |||
| Battery | 4*1.5V AA | 4*1.5V AA | ||
| Working time | First gear:30H Fourth gear:62H | First gear:11H Fourth gear:28 | ||
| Laser Level Weight/Size of level | 260g g/95*85*60mm | 260g g/95*85*60mm | ||
| Weight/Size of Color box | 455g/127*105*80mm | 455g/127*105*80mm | ||
| Weight/Size of out carton | 32 pcs/ 15kg/ 44*27*33.5cm | 32 pcs/ 15kg/ 44*27*33.5cm | ||
Manual of Cross line Laser Level T07T08.pdf
Although this level has only two lines, it is smaller and more portable than a normal two-line level and the vertical line can pass through the zenith
2-LINE
LASER LEVEL
Superior Light Source
Millimeter accuracy
Power saving mode
NEW MACHINE ANDNEW UPGRADE
Ten levels of light brightness adjustment, adjust according to the indoorlight illuminance, protect the eyes, and save electricity
SEVEN ADVANTAGES
Concentrate on each product
Dual module Auto-leveling Superior Light Source
One-piece injection Vertical to top Slash at any angle Pulse mode
AUTOMATIC LEVELING
When the inclination angle is less than 4°. it will be leveled automatical-ly, and the green light is always on,When the tilt angle>4°.the indicatorlight turns red and the laser line flashes to indicate
SUPERIOR LIGHT SOURCE
Superior LD light source, high and low temperature resistance (-10C-50'℃), long life, uniform light
ONE-PIECEINJECTION
Large area soft rubber protection, ergonomic design
VERTICAL TO TOP
Compared with the general marking instrument, the vertical line crosses the zenith
SLASH AT ANY ANGLE
With a tripod, lock the movement, slash at any angle
PULSE MODE
When you can't see clearly at a long distance, you can work with a pulse receiver
Sound notification receivedpulse signal
APPLICABLE SCENE
Ornament installation Ceiling construction Wall construction Door installation
We are a manufacturer .Our factory has 9,000 square meters of professional production workshops and independent research and development
experimental centers, providing continuous and stable support and guarantee for new product development, production and upgrading quality and market sales.
We have our own factory and excellent design team. OEM/ODM is accepted. Please do not hesitate to contact with us to show your idea.
RoHS CE FCC UKCA FDA
A :Factory (We produce, we sell).
A : We do customizing service for customers. OEM/ ODM is welcome. Any logo and any color is up to you.The English copy of manual is also available.
A : Regular products only 1 standard carton. but no limit for sample order!
a: Send us an inquiry
b: Confirm your wanted products
c: Confirm the price, freight and other details
d: Complete the payment in Alibaba
e: We start production and arrange the shipment
f: You got your products
g: We get the payment
A : It depends on whether we are in stock or not. Our standard arrangement time is 3 days if we have stock, otherwise it will be decided by factory production. Generally, it needs 10-45 days of production according to the quantity of your order.
A : DHL/FEDEX/UPS/EMS all is ok, it is base on Customer's prefer! and we can advise the suitable shipping way base on the customer's order quantity!
A : We offer 12month warranty. Our policy: Within the warranty period, If there is any quality problem, please send us photos to show the problem.And then we will decide to send you parts or you send the instrument back to us to repair or exchange. Please make sure to contact us first instead of sending it to us directly. You only need to pay double-run freight.
T07 (red light) /T08 (green light) laser level adopts imported high quality light source, the whole body is covered with soft glue, anti-seismic and anti-fall, one two-color mode process, double laser module, double switch design, small size, easy to carry
| Model | T07（red beam） | T08 （green beam） | ||
| Laser wavelength | 630-670nm | 505-550nm | ||
| Laser power(H/V) | 5mw | 10mw | ||
| Laser class | Output<1mW Class 2 | Output<1mW Class 2 | ||
| Laser beam | 1H1V(Vertial line over zenith) | 1H1V(Vertial line over zenith) | ||
| Accuracy(H/V) | ±3mm/10m | ±3mm/10m | ||
| Auto-compensation Range | 4°±1° | 4°±1° | ||
| Beam Emission Angle(H/V) | ＞130° | ＞130° | ||
| IP rating | IP54 | IP54 | ||
| Laser class | Class 2 | |||
| Working temperature | ﹣10~50℃ | ﹣10~50℃ | ||
| Working range | 15m | 30m | ||
| Working range with reciever | about 50m | |||
| Battery | 4*1.5V AA | 4*1.5V AA | ||
| Working time | First gear:30H Fourth gear:62H | First gear:11H Fourth gear:28 | ||
| Laser Level Weight/Size of level | 260g g/95*85*60mm | 260g g/95*85*60mm | ||
| Weight/Size of Color box | 455g/127*105*80mm | 455g/127*105*80mm | ||
| Weight/Size of out carton | 32 pcs/ 15kg/ 44*27*33.5cm | 32 pcs/ 15kg/ 44*27*33.5cm | ||
Manual of Cross line Laser Level T07T08.pdf
Although this level has only two lines, it is smaller and more portable than a normal two-line level and the vertical line can pass through the zenith
2-LINE
LASER LEVEL
Superior Light Source
Millimeter accuracy
Power saving mode
NEW MACHINE ANDNEW UPGRADE
Ten levels of light brightness adjustment, adjust according to the indoorlight illuminance, protect the eyes, and save electricity
SEVEN ADVANTAGES
Concentrate on each product
Dual module Auto-leveling Superior Light Source
One-piece injection Vertical to top Slash at any angle Pulse mode
AUTOMATIC LEVELING
When the inclination angle is less than 4°. it will be leveled automatical-ly, and the green light is always on,When the tilt angle>4°.the indicatorlight turns red and the laser line flashes to indicate
SUPERIOR LIGHT SOURCE
Superior LD light source, high and low temperature resistance (-10C-50'℃), long life, uniform light
ONE-PIECEINJECTION
Large area soft rubber protection, ergonomic design
VERTICAL TO TOP
Compared with the general marking instrument, the vertical line crosses the zenith
SLASH AT ANY ANGLE
With a tripod, lock the movement, slash at any angle
PULSE MODE
When you can't see clearly at a long distance, you can work with a pulse receiver
Sound notification receivedpulse signal
APPLICABLE SCENE
Ornament installation Ceiling construction Wall construction Door installation
We are a manufacturer .Our factory has 9,000 square meters of professional production workshops and independent research and development
experimental centers, providing continuous and stable support and guarantee for new product development, production and upgrading quality and market sales.
We have our own factory and excellent design team. OEM/ODM is accepted. Please do not hesitate to contact with us to show your idea.
RoHS CE FCC UKCA FDA
A :Factory (We produce, we sell).
A : We do customizing service for customers. OEM/ ODM is welcome. Any logo and any color is up to you.The English copy of manual is also available.
A : Regular products only 1 standard carton. but no limit for sample order!
a: Send us an inquiry
b: Confirm your wanted products
c: Confirm the price, freight and other details
d: Complete the payment in Alibaba
e: We start production and arrange the shipment
f: You got your products
g: We get the payment
A : It depends on whether we are in stock or not. Our standard arrangement time is 3 days if we have stock, otherwise it will be decided by factory production. Generally, it needs 10-45 days of production according to the quantity of your order.
A : DHL/FEDEX/UPS/EMS all is ok, it is base on Customer's prefer! and we can advise the suitable shipping way base on the customer's order quantity!
A : We offer 12month warranty. Our policy: Within the warranty period, If there is any quality problem, please send us photos to show the problem.And then we will decide to send you parts or you send the instrument back to us to repair or exchange. Please make sure to contact us first instead of sending it to us directly. You only need to pay double-run freight.
